Jiushen Wire Weaving

  Epoxy coated aluminum window screen mesh is ideal for screening windows, doors and porches where extra strength and excellent visibility and air flow are required. It enjoys many advantages, such as strong and durable, resist rust ,extra resistance against ember attack, excellent visibility, charcoal and black finishes reduce sun glare.   However, we have learned from various channels that some brands of  epoxy coated aluminum screen mesh  with smaller wire diameter (such as 0.23mm) will have tearing problems during installation, but no problem with thicker wires, such as 0.28mm, 0.41mm. Why does 0.23mm epoxy coated aluminum mesh encounter tearing problem? Let's analyze it today.   Let's analyze it from three aspects: raw materials, production process and installation process.   First: In terms of raw materials, the aluminum wire must have a certain elongation rate. Since the interweaving point of the mesh is fixed after epoxy coating, if the wire elongation rate is too small

  There are 4 weaving methods for copper wire mesh: 1. Plain weave: Plain weave is a weaving method in which each warp thread crosses over each weft thread, the diameter thread is the same thickness as the weft thread, and the warp thread and the weft thread form a 90-degree angle. The plain weave mesh is relatively square, and the mesh size is uniform. Each warp thread crosses above and below each weft thread, the diameter thread is the same thickness as the weft thread, and the warp thread and the weft thread are woven at a 90-degree angle. ​​ 2. Twill weave: Weaving method in which each warp thread crosses up and down every 2 weft threads, and each weft thread crosses over each 2 diameter threads. ​ 3. Dense weave: Warp and weft have different wire diameters and different mesh numbers, characterized by dense warp and weft, and fine warp and weft. The length direction is the warp, and the width direction is the weft. Dense mesh is further divided into mat type mesh plain weave and ma